Difference between revisions of "Ricoh Scanner FAQ"

From UW-Math Wiki
Jump to: navigation, search
(Ricoh Scanner FAQ)
Line 22: Line 22:
  
 
Once you have entered your e-mail address, you should be able to reach it by clicking on the key which corresponds to the first letter of your Math Dept e-mail address.
 
Once you have entered your e-mail address, you should be able to reach it by clicking on the key which corresponds to the first letter of your Math Dept e-mail address.
 +
-------------
 +
 +
Quickstart Instructions
 +
 +
select scanner - button in column on left side
 +
if machine seems to be asleep press On button repeatedly
 +
if necessary deselect "Simplified Display" using button on lower right
 +
 +
choose To  - 
 +
e.g., press LMN and then square with Arnold Miller -
 +
rightmost square in first row
 +
 +
choose Sender Name -
 +
use button on bottom row right side 
 +
do as "To" - then press OK
 +
I tried randomly choosing a sender and it didn't object
 +
unless I did not specify a "Sender". 
 +
You must use Advanced Display to choose Sender.
 +
 +
optional
 +
change Scan Settings to 300dpi greyscale / button on left  - press OK
 +
change Send File Type to multipage pdf 
 +
  if you don't you may get 200dpi tif file
 +
  singlepage mode means one-file per page
 +
 +
press Start button to scan - button on lower right
 +
 +
repeat press Start for more pages
 +
 +
press  # = Enter button  to finish - located above Start button
 +
 +
if you press Stop Button nothing will be emailed
 +
 +
it can take 3-4 minutes before you get email

Revision as of 16:08, 8 July 2011

Ricoh Scanner FAQ

There is no charge for scanning documents. However, you should not scan (or copy) copyrighted material. Select the scan function by pressing the Scanner button on the left of the display panel. Here are the simplified and advanced displays which you will see when you do this:

 simple display: Scan-display-simple.gif
 advanced display: Scan-display.gif

Here is a quick rundown of the things most people might want to change

  • Default Scan Settings:
 these are set to 200 dpi, grayscale and single sided.
 Click on the SCAN button in the upper left block to change these options.
  • Setting the e-mail destination:
 You will probably want to change the e-mail destination. If this is the first time you have 
 done this, you should press the  display settings toggle in the lower right hand corner to get 
 the advanced display. Press the manual entry button (labeled 4) to enter your e-mail 
 address on the LCD keyboard which will appear.  Most people in the Math Dept have had their 
 e-mail addresses pre-entered, so you should see yours after you type the first few letters.

Once you have entered your e-mail address, you should be able to reach it by clicking on the key which corresponds to the first letter of your Math Dept e-mail address.


Quickstart Instructions

select scanner - button in column on left side

if machine seems to be asleep press On button repeatedly
if necessary deselect "Simplified Display" using button on lower right

choose To -

e.g., press LMN and then square with Arnold Miller - 
rightmost square in first row

choose Sender Name -

use button on bottom row right side  
do as "To" - then press OK
I tried randomly choosing a sender and it didn't object
unless I did not specify a "Sender".  
You must use Advanced Display to choose Sender.

optional

change Scan Settings to 300dpi greyscale / button on left  - press OK
change Send File Type to multipage pdf   
 if you don't you may get 200dpi tif file
 singlepage mode means one-file per page

press Start button to scan - button on lower right

repeat press Start for more pages

press # = Enter button to finish - located above Start button

if you press Stop Button nothing will be emailed

it can take 3-4 minutes before you get email