Difference between revisions of "Ricoh Scanner FAQ"

From UW-Math Wiki
Jump to: navigation, search
Line 10: Line 10:
 
Here is a quick rundown of the things most people might want to change
 
Here is a quick rundown of the things most people might want to change
  
* Default Scan Settings: these are set to 200 dpi, grayscale and single sided.
+
* Default Scan Settings:  
 +
  these are set to 200 dpi, grayscale and single sided.
 
   Click on the '''SCAN''' button in the upper left block to change these options.
 
   Click on the '''SCAN''' button in the upper left block to change these options.
  
* Setting the e-mail destination:  You will probably want to change the e-mail
+
* Setting the e-mail destination:   
  destination. If this is the first time you have done this, you should press the  
+
  You will probably want to change the e-mail destination. If this is the first time you have  
  display settings toggle in the lower right hand corner to get the '''advanced display'''.
+
  done this, you should press the display settings toggle in the lower right hand corner to get  
  press the manual entry button (labeled 4) to enter your e-mail address on the LCD keyboard which  
+
  the '''advanced display'''. Press the manual entry button (labeled 4) to enter your e-mail  
  will appear.  Most people in the Math Dept have had their e-mail addresses pre-entered, so
+
  address on the LCD keyboard which will appear.  Most people in the Math Dept have had their  
  you should see yours after you type the first few letters.
+
  e-mail addresses pre-entered, so you should see yours after you type the first few letters.
 +
 
 +
Once you have entered your e-mail address, you should be able to reach it by clicking on the key which corresponds to the first letter of your Math Dept e-mail address.

Revision as of 11:22, 28 June 2011

Ricoh Scanner FAQ

There is no charge for scanning documents. However, you should not scan (or copy) copyrighted material. Select the scan function by pressing the Scanner button on the left of the display panel. Here are the simplified and advanced displays which you will see when you do this:

 simple display: Scan-display-simple.gif
 advanced display: Scan-display.gif

Here is a quick rundown of the things most people might want to change

  • Default Scan Settings:
 these are set to 200 dpi, grayscale and single sided.
 Click on the SCAN button in the upper left block to change these options.
  • Setting the e-mail destination:
 You will probably want to change the e-mail destination. If this is the first time you have 
 done this, you should press the  display settings toggle in the lower right hand corner to get 
 the advanced display. Press the manual entry button (labeled 4) to enter your e-mail 
 address on the LCD keyboard which will appear.  Most people in the Math Dept have had their 
 e-mail addresses pre-entered, so you should see yours after you type the first few letters.

Once you have entered your e-mail address, you should be able to reach it by clicking on the key which corresponds to the first letter of your Math Dept e-mail address.